Product overview:

The product is made from dried ginseng stems and leaves by crushing, canning, boiling extraction, adsorption and elution, evaporation and spray drying to obtain ginseng stems and leaves extract, and then prepared by special compound technology, which can be used for textile treatment.

Product performance:

Appearance: Dark liquid       

Ionicity: Non-ionic

Composition: Ginseng stem and leaf extract   

Solubility: Dispersed in water

Application methods:

It can be applied by padding, impregnation or spraying.

1. Padding method:

The general dosage is 40-70 g/L; One immersion and one padding (padding liquid ratio: 70-100%) → drying → setting.

2. Impregnation method:

Suggested dosage: 2-4% weight ratio to fabric;

Bath ratio: 1:10-15;  Temperature:  at 25-40℃. ;

Soaking: for 15-30 minutes  →dehydration→ drying:  at about 80-100℃ → setting:  at 120-150℃.

Test methods:

The fabric treated by the product can be tested for the content of active ingredient-ginsenoside. Please consult our company for details.

Precautions:

Pre-test should be carried out before mass production to confirm the compatibility of various additives.

Packing:

25 kg/barrel; Or pack according to customer requirements.

Storage:

Store in a place away from light, dry and well ventilated;

It is forbidden to store in high temperature, open air or places with fire sources.

All the information given above is based on our knowledge and understanding of the product and is for reference only. Before using the product, please do a sample test to confirm whether the results meet your requirements. Because we can't predict or control the end use of the product, every user must operate and use the product safely. The true condition test and performance of the product are the responsibility of the end user, and the company will not bear any quality or patent disputes , nor will it bear any direct or indirect loss liability.