Functional auxiliariesFunctional Masterbatch/AdditivesFunctional fibers/yarnsAustralia HealthGuard®
Anti –virus and anti-microbial agent JYK ACD-2020

Product overview:

The product is an antiviral finishing agent, which can be used for antiviral finishing of cellulose fibers such as cotton, viscose, LYOCELL, wool, silk fabrics and blended fabrics such as cellulose fibers and polyester, nylon and Lycra (spandex); It can be widely used in antiviral finishing of clothes, towels, bedding, wet wipes and non-woven fabrics.

Product character:

Compatible with most finishing agents;

The antiviral finishing agent has a high inactivation rate for influenza viruses such as H1N1 and H3N2 ,which can meet the requirements of ISO 18184.

Product performance:

Appearance: Light yellow liquid     

pH: 5-8

Viscosity: Less than 100 cps     

Density: 1.0-1.1 g/cm3

Solubility: Dissolved in water

Stability: Stable storage under normal temperature to 0℃.If frozen,it should be melt before using it.

Application methods

Application methods such as padding, impregnation, spraying, coating and foam application can be adopted:

General dosage: 8-15% (weight ratio to fabric), specific dosage according to specific requirements of antiviral activity value.

1. Padding method: For open-width processed fabrics, padding method can be used;

Suggested dosage: 8-15% weight ratio to fabric or 100-200 g/L;

Liquid ratio: 80-100%; Drying → setting: at 120-160℃ for 1-2 minutes.

2. Impregnation method: The product has good affinity for cellulose fiber and can be adsorbed on the fiber;

Suggested dosage: 8-15% weight ratio to fabric; pH: 6.5-7;

Bath ratio: 1:10-15; Bath temperature: at  40-60℃; Impregnation time: for 20-30 min;

Drying → setting:  at 120-160℃ for 1-2 minutes.

Precautions:

1. When using padding process, avoid using it in the same bath with special fluorescent whitening agent sensitive to acidity. When treating white bleached cotton cloth, make sure that all residual bleaching agent has been removed before use;

2. Compatible with most finishing agents.Pre-test should be carried out before mass production to confirm the compatibility between various additives.

Packing:

25 kg/barrel; Or pack according to customer requirements.

Storage:

Store in a dark, dry and well-ventilated place;

It is forbidden to store in high temperature, open air or places with fire sources.

 

 

All the information given above is based on our knowledge and understanding of the product and is for reference only. Before using the product, please do a sample test to confirm whether the results meet your requirements. Because we can't predict or control the end use of the product, every user must operate and use the product safely. The true condition test and performance of the product are the responsibility of the end user, and the company will not bear any quality or patent disputes , nor will it bear any direct or indirect loss liability.

 

 

Test reports
Back
Copyright (C) 2022,Shanghai JIECON Chemicals Hi-Tech Co., LTD. All Rights Reserved.Supported by ChemNet ChinaChemNet Toocle 31fabu Copyright Notice
备案号:沪ICP备14004632号-3

沪公网安备 31010502006385号