Product overview:

The product is an antibacterial agent with good performance, it can effectively inhibit the growth of bacteria on the plastic surface.

The product can be applied to use temperature not more than 250-270℃ of a variety of polymers, such as: polyolefin (polypropylene, low density and high density polyethylene), EVA, PMMA, polystyrene,  polyurethane, thermoplastic polyurethane (TPU), rubber and cellulose acetate; It can also be used in PVC and ABS, but pre-test should be carefully carried out to determine the final formula.

The final production added with the product has durable antibacterial property and can be widely used in sanitary accessories (toothbrushes, sanitary cushions), sanitary products, trash cans, insoles, mats, hospital supplies and other fields.

Product character:

Good compatibility with plastics;

Soluble in various organic solvents and surfactants;

It has good antibacterial properties.

Product performance:

Appearance: White crystalline powder

Density: 1.5-1.7 g/cm³

Bouquet: Tasteless or slightly aromatic

Application dosage (weight ratio of products):

Polyethylene: 0.3-0.5%;    EVA: 0.3-0.5%;

Polypropylene: 0.3-0.5%;   PVC: 0.5-1%;

Polyurethane: 0.5-1%;     Unsaturated polyester (UP): 0.3-1%;

PMMA: 0.3-1%;   Thermoplastic polyurethane (TPU): 0.3-0.5%.

Precautions:

1. During the use of the product, suggested to wear masks, gloves ,which can avoid direct contact with the skin;

2. After using the product, thoroughly clean your hands and exposed skin.

Packing:

25 kg/bag; or pack according to customer requirements.

Storage:

Store in a place away from light, dry and well ventilated;

It is forbidden to store in high temperature, open air or places with fire sources.

All the information given above is based on our knowledge and understanding of the product and is for reference only. Before using the product, please do a sample test to confirm whether the results meet your requirements. Because we can't predict or control the end use of the product, every user must operate and use the product safely. The true condition test and performance of the product are the responsibility of the end user, and the company will not bear any quality or patent disputes , nor will it bear any direct or indirect loss liability.